Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8082287
- Product Categories
- Friendly Links
Information Name: | Supply Carbon Fiber Plastic |
Published: | 2011-10-11 |
Validity: | 180 |
Specifications: | DMEP-DJ-ZB |
Quantity: | 0.00 |
Price Description: | Power Conference yuan / kg |
Detailed Product Description: | Carbon Fiber Carbon fiber impregnated with paste adhesive glue Model: DMEP-DJ-ZB Features ● for the two-component epoxy resin adhesive. ● low viscosity, infiltration of carbon fiber, osmotic paste performance. ● DMEP series of carbon fiber reinforced adhesive compression, tensile strength, excellent bonding strength, bending strength, good toughness. ● two-component mixture of operational time is moderate and easy construction. ● anti-aging and resistance to media corrosion and good water resistance. ● high solid content, solvent-free, safe and nontoxic. For ● DMEP-DJ-ZB special impregnated adhesive paste has been used mainly for special brushing the concrete surface of the end of plastic impregnated CFRP composites with carbon fibers to form a solid high-strength reinforcement layer, so that reinforcement of concrete buildings be repaired , extending its life. The adhesive can also be used to paste the glass fiber and other types of fiber sheet material. Typical performance Performance Project Standards Test results Tensile strength (MPa) ≥ 30 41 Elongation (%) ≥ 1.5 2.0 Bending strength (MPa) ≥ 40 and no brittle failure was 51 Compressive strength (MPa) ≥ 70 72 Steel - steel tensile shear strength (MPa) ≥ 10 14.2 Tensile bond strength and concrete are (MPa) ≥ 2.5 and cohesive failure of concrete 2.9 Nonvolatile Content (%) ≥ 99 99.6 Construction Points ● Preparation for construction According to the construction site and is the actual state of reinforced concrete components, the control design drawings to determine the construction program, to do preparatory work before construction. ● Surface Treatment Removal of paint layers and reinforcement components falling off, loose, cellular, and corrosion deterioration of concrete, exposed concrete floor, according to the design of the cracks pouring or closed treatment, the concrete surface should be polished smooth paste, paste to the lead angle corner handle and polished into a circular shape, radius of not less than 20mm. Concrete surface should be clean and dry. ● brushing DMEP Primer Accurately weighed according to the proportion of underfill A, B, component, according to A: B = 2.5:1 (mass ratio) to mix in a clean container with brush or roller brush to stir even a good brushing at the end of glue concrete surface. Until the end of glue is dry (usually 3-4 hours) immediately to the next step process of construction. ● paste carbon fiber according to the design cut to size carbon fiber, according to the proportion of accurate weighing DMEP paste adhesive A, B component, according to A: B = 2.5:1 (mass ratio) in a clean container to mix, to be evenly applied in the Paste the site and paste the sheet, in the lap, right around the corner multi-coated, with a smooth drum roller along the fiber direction several times, squeezing the paste except the bubble gum to fully soaked sheets, carbon fiber roll shall not damage. ● brushing glue table Glue is dry on the surface of carbon fiber layer DMEP paste glue evenly. |
Admin>>>
You are the 17346 visitor
Copyright © GuangDong ICP No. 10089450, German-American Building Engineering Company Beijing Branch All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 17346 visitor
Copyright © GuangDong ICP No. 10089450, German-American Building Engineering Company Beijing Branch All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility